Can I Tighten My Own Glasses? | KOALAEYE OPTICAL

Can I Tighten My Own Glasses?

Driver's protective glasses

The principle of the driver's protective glasses is to use the special film on the glasses to reflect the strong light hitting the glasses back to protect the eyes. It can protect against ultraviolet, infrared and blue light on foggy and rainy days. In snowy weather and at night, the wearer can see the scenery more clearly, and it can also increase the vividness of red, yellow, green, white, and other colors, and eliminate the glare and reflected light of the oncoming cars when meeting cars at night.


Eyeglass direct

Eyeglass direct makes high-quality prescription glasses at the lowest possible price. Twenty years of experience gives you the know-how to deliver services at the lowest cost. All glasses are made with high-quality frames and high-quality lenses, using the most progressive, computerized optical processing equipment. That helps lower labor costs, passing on savings to consumers.The flexible titanium eyewear range at Eyeglass direct gives you the best quality eyewear at an affordable price.



How to Perform Glasses Measurements?

If there is no number on the temple of eyeglasses, you can perform glasses measurements by yourself. Now, we will show how to do that.

To measure the glasses’ size, you need to prepare a ruler or a tape first. To measure the frame width, measure the entire horizontal front of the frame, from the furthest extended point on either side. As for lens height, you should measure the vertical height of the lens. As for the bridge, you should measure the part that goes across the bridge of your nose. The temple arms include the front of the frame on either side and the rest behind your ear. The lens width is the horizontal diameter of one lens. So, when measuring these, you should be careful.

After that, you have measured the glasses frame size. If you want to know whether your face is right for this frame, you can read the post: How to Measure Face for Glasses Frames - 7 Steps

If you need a pair of new glasses, you can try Koalaeye glasses. They are stylish and cheap and they are lots of available choices.


How to know if lens is polarized?

Make use of LCD screens. Point the glasses horizontally at the LCD screen and then rotate them upward by 45 degrees clockwise. If it is a polarized lens, it will show a change in color deepening. If it does not change no matter how you rotate it, it is not a polarized lens. You can borrow another person's polarized lens or have previously worn a known true polarizer, and place it crossover with the new glasses you want to buy. At this time, you should see the object clearly from the crossover part with your eyes. Then cross the glasses vertically and horizontally, and at this point, the opposite object should not be visible from the intersection. If this condition is satisfied, it means that a true polarized lens is being tested.



Advantages of Progressive Lens

Continuous and clear vision throughout the entire process is the advantage of progressive lenses. Because the added value continuously increases gradually in the gradient zone, the wearer can obtain continuous clear vision from the far point to the near point through the gradient lens under the appropriate head position. In line with physiological optics, better adaptation. The appearance is better than that of double-lens and triple-lens. There is no dividing line of sub-sheets, and there is no ring-shaped blind zone and invisible sub-sheets.


Have regular professional examinations.

The rimless glasses frame is directly punched on the lens and fasteners are added to fix the lens. It is easy to loosen the lens after long-term wearing. Therefore, it is recommended to regularly check and correct the glasses in the store when wearing rimless glasses. If the protective nut of rimless glasses falls off, stop using them immediately and repair them in time before wearing them. If screws and other accessories are loose, etc, be sure to go to the optical shop by the professional processing division to adjust.


Sale priceFrom
Sale priceFrom


Why are titanium glasses so expensive?

Strong and Durable. They are widely used in aerospace technology, jewelry, surgical instruments, and other fields. It is the most progressive material in the eyewear industry. Titanium is a very hard, lightweight metal that is proper for eyeglass frames. With good hardness, high strength, the glasses are not easy to deform. It is not easy to scratch and wear and has good corrosion resistance and plasticity. It has a high melting point, corrosion resistance, and hard electroplating. Titanium can be made into memory metal, which means it can bend and return to its original shape. Hinge is not easy to break, having rust resistance, impact resistance. When it's used in glasses, it fits the bill.If you've ever broken a frame, titanium is possible the best material for you.

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.